Vertical System
|
| Bandwidth |
200 MHz |
| Rise time |
1.8 ns |
| Input Channels |
4 |
| Bandwidth Limiters |
20 MHz |
| Input Impedance |
1 MΩ ± 2% || 13 pF ± 3 pF, 50 Ω ± 2% |
| Input Coupling |
AC, DC, GND |
| Maximum Input Voltage |
1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation |
≥ 100:1 at 100 MHz |
| Vertical Resolution |
8 bits |
| Sensitivity |
2 mV/div - 5 V/div |
| DC Gain Accuracy |
±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges |
| Offset Range |
±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div |
| |
Horizontal System
|
| Time/Division Range |
2.5 ns/div - 50 s/div |
| Clock Accuracy |
100 ppm |
| Trigger and Interpolator Jitter |
.5 ns (pk-pk) |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
2 GS/s on 1 Ch
1 GS/s on 2 Ch |
| Equivalent Sample Rate |
50 GS/s |
| Memory |
20 kpts/Ch on 1 Ch
10 kpts/ch on 2 Ch |
| |
Acquisition Modes
|
| Averaging |
Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256 |
| Peak Detect |
2.5 ns |
| Interpolation |
Linear, Sin x/x |
| Enhanced Resolution |
na |
| Sequence Mode |
na |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, Stop |
| Sources |
Ch 1 - Ch 4, EXT, EXT/5, AC Line |
| Coupling Mode |
AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay |
memory/(2 * sample rate) |
| Post-trigger Delay |
260 Divisions |
| Hold-off by Time or Events |
100 ns - 1.5 s |
| Internal Trigger Range |
±6 divisions from center |
| Trigger Sensitivity |
1 division: DC - 10 MHz
1.5 divisions: 10 MHz - 200 MHz |
| External Trigger Sensitivity |
Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 200 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 200 MHz |
| External Trigger Input Range |
Ext: ±1.2 V, EXT/5: ±6 V |
| |
Display
|
| Type |
Color 5.7" TFT-LCD |
| Resolution |
QVGA; 320 x 234 pixels |
| Grid Styles |
YT (12 horizontal divisions), XY |
| |
Trigger Types
|
| Optional Advanced Triggers |
na |
| Optional Serial Data Triggers |
na |
| |
Internal Storage
|
| Waveform Storage |
20 waveforms and 2 reference waveforms |
| Setup Storage |
20 setups |
| |
Math
|
| Number of Math Traces |
1 |
| Standard Math Functions |
Add, Subtract, Multiply, Divide, FFT |
| Optional Math Functions |
na |
| |
Measurements
|
| Number of Measurements Displayed |
5 |
| Measurement Parameters |
Amplitude, Average, Base, Burst Width, Cyclical RMS, +Duty Cycle, -Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, +Width, -Width, First Rising-Rising, First Rising-Falling, First Falling-Rising, First Falling-Falling, Last Rising-Rising, Last Rising-Falling, Last Falling-Rising, Last Falling-Falling |
| |
Probes
|
| Probes |
Qty. (4) ÷10/1 Passive Probes |
| Scale Factors |
Manual: ÷1, ÷10, ÷100, ÷1000 |
| Calibration Output |
1 kHz square wave, 3Vp-p (typical), output to probe hook |
| |
Interface
|
| GPIB Port (optional) |
na |
| USB (Device) |
1 |
| Ethernet Port |
1 |
| USB (Host) |
2 |
| Serial Port |
na |
| |
Power Requirements
|
| Voltage |
100 - 240 VAC, 45 Hz to 440 Hz |
| Max. Power Consumption |
50 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
10 °C to 40 °C |
| Temperature (Non-Operating) |
-20 °C to 60 °C |
| Humidity (Operating) |
85% RH, 40 °C |
| Humidity (Non-Operating) |
85% RH, 65 °C |
| Altitude (Operating) |
3000 m |
| Altitude (Non-Operating) |
15,266 m |
| |
Physical Dimensions
|
| Dimensions (HWD) |
152 mm x 336 mm x 118 mm
(5.9" x 13.2" x 4.65") |
| Weight |
3.0 kg (6.6 lbs) |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services. |